Blog

Ellis Environmental Management Inc.

News and Information

Ellis is strong thanks to you!

We were on a roll . . . increasing, record revenue for the past 4 years running, 10 employees, the latest in testing equipment, and 3 or 4 company trucks depending on who you ask.  (Thank you, Mike Motors.) 

I was feeling down over the weekend because, after 3.5 years with no changes in personnel, a key industrial hygienist resigned last week.  It made for a rough weekend of quiet thought and second-guessing myself. 

But you know what?  This morning at 05:30, I met 3 employees at the office and helped them get their assigned vehicles loaded up for a day of monitoring and inspections at various locations in LA County. 

Continue reading
Tags:
165 Hits

Sampling Concrete for Asbestos



For years, concrete floors, walls and footings were not considered to be “suspect asbestos-containing materials.”  Concrete was often not even sampled during a standard asbestos survey.  Some time ago, the SCAQMD confirmed that concrete was indeed a “suspect material,”  so we began collecting surface samples from accessible concrete walls and floors, using a cold chisel and a hammer. 

During a recent refresher training session in Anaheim, an instructor noted that concrete in the middle of a wall or floor may be different than concrete on the surface.  He (or someone) suggested coring through each slab or wall to get a better representation of the material.  We performed a few of these cores, but I didn’t like it.  It seemed overly burdensome and expensive for the client.  l  So I wrote directly to the SCAQMD, requesting clarification.  My letter and their response are shown below:

From: Duane Behrens [mailto:This email address is being protected from spambots. You need JavaScript enabled to view it.]Sent: Tuesday, June 18, 2019 1:23 PMTo: Christopher Ravenstein <This email address is being protected from spambots. You need JavaScript enabled to view it.>Cc: Ellis Professional Staff <This email address is being protected from spambots. You need JavaScript enabled to view it.>Subject:  Sampling Concrete

Continue reading
Tags:
183 Hits

Ellis Staff & Vehicles - 2019



 

It occurred to me the other day as I walked through the office (and the parking lot, actually) of how much we’ve grown. New vehicles add to our growing fleet, sophisticated new IAQ equipment – all of it helps us respond faster and do better work for you. We believe in re-investing in the business, including investing in our people, maybe most importantly, in our people.

And it occurred to me you are a big part in making this possible. From all of us who come to work every morning wanting to outperform ourselves, thank you for this opportunity to practice a profession we love.

Continue reading
Tags:
702 Hits

When Water Intrudes



Recent heavy rains in southern California are impacting many buildings. We’re seeing damage to ceiling spaces, wall spaces and floors.  If not addressed quickly, mold growth – and its attendant problems – are likely.

Avoiding mold growth is not difficult. 

These simple steps are the most efficient way to get your building and work spaces back in service, at a minimum cost, and with the shortest possible delay. Done quickly, mold growth can be avoided altogether.

Continue reading
Tags:
479 Hits

Ellis Responds to Southern California Woolsey & Hill Fires


In the aftermath of the Southern California Woolsey and Hill Fires, Ellis is providing services at reduced cost to schools, daycare and other facilities with children present. Because of insurance limitations, we cannot respond to requests from private residents or homeowners.

Learn More

Continue reading
Tags:
646 Hits

Iron Mining - and Mesothelioma

Regarding the high number of mesothelioma deaths in northeastern Minnesota (3 to 4 times the national average), the Vermillion and Mesabi mining ranges were among the first big mining ranges famous for their large deposits of iron ore.   In these mining pits, a large amount of taconite was also mined, which contained iron.  Taconite is compared with asbestos because of similarities in chemical makeup.  Taconite products are commonly distributed - not just in the Mesabi and Vermillion ranges – but also around the surrounding Great Lakes Region.  These products have been linked to the increased number of mesothelioma diagnoses in this area.  Unfortunately, mesothelioma can take many years to develop.   So, anyone who worked in the mines or was exposed to products made from these materials is at risk of developing mesothelioma. 

More information can be found at the Mesothelioma Guide:

View Mesothelioma Guide

Continue reading
Tags:
1009 Hits

Ellis Surpasses $1 Million In Sales


In 2017 and for the third year running, our little company (Ellis Environmental) surpassed $1 million in sales and assets. Not bad for a 9-person effort. During that time and in addition to our core services, we saw a steady rise in the number of indoor air quality investigations performed, representing app. 12% of total revenue in FY2016/17. Many, many thanks to the faithful clients, employees, contractors and vendors who have made this possible.

Continue reading
Tags:
851 Hits

Visual Inspections on VFT and Associated Mastic Abatement

I wanted to share some protocols and "tips" I've learned and followed during my years with Ellis performing inspections on vinyl floor tile (VFT) and mastic abatement. Though these jobs are often viewed as fairly straight forward, challenges and obstacles can arise quickly, and owners can often land themselves in some fairly sticky situations as a result. 

Here's how Ellis approaches these inherently complex jobs:

What is the substrate material?

This is critical to the abatement and inspection process for VFT & mastic, and it's something that must be learned long before abatement begins --during bulk sampling. Inspectors and consultants performing building surveys should always make a note and include substrate material in their sampling reports. Because:

Continue reading
Tags:
1926 Hits

A Year In Review

2015/2016 were Ellis’ most successful back-to-back years since the company was formed 22 years ago. Some of our more notable accomplishments:

Ellis assisted a large Glendale landowner in assessing possible contaminants at an adjacent property prior to purchase. The project required Ellis to assemble, coordinate and review the efforts of geologists, toxicologists, contractors and developers. In this case, potential cleanup costs were significant, and the buyer made the difficult choice to pass on the purchase. Ellis provided AHERA 3-year, asbestos re-inspections for Palos Verdes, Inglewood and other public school districts. After identifying the asbestos materials (ACMs), Ellis prioritized identified ACMs for removal based on their condition, damage, accessibility and “friability” (ability to become airborne). Ellis assisted a local/regional airport in identifying toxic substances (primarily lead and zinc) released following 3 severe hangar fires. Procured bids for and managed the subsequent hazardous materials cleanup. Ellis provided lead and asbestos surveys, lead surveys, and testing for lead in potable and drinking water for more than a dozen regional charter schools. Provided countless indoor air quality studies, testing for airborne carbon dioxide, ultra-fine particles (UFPs), carbon monoxide, volatile organics, asbestos dust, lead dust, mold, gram-positive cocci, enterococcus and a host of other contaminants. Ellis assisted in responding to more than 100 water intrusion events for various clients. Most of the water intrusions were rainwater, but we also responded to gray water, sewage and water supply line leaks. Ellis is the best first call here; we identify wet wallboard (and other damaged materials) and then manage their timely removal before mold has a chance to grow. For sewage-related spills, clearance enterococcus swabs are collected to insure a complete cleanup. Ellis assisted UCLA Housing, Loyola Marymount University, Mt. St. Mary’s, Santa Monica College, and other regional colleges and universities in procuring bids and managing the removal of moisture-damaged, asbestos-containing and/or lead-containing materials classrooms and housing facilities.

And so on. Our employees are, without exception, degreed chemists or industrial hygienists. Clients seem to appreciate and rely on the confidence, experience and professionalism those employees bring to each project. We’re thankful for each opportunity to do so.

All the best for 2017.

Continue reading
Tags:
1949 Hits

Lead In Drinking Water

leadinwater.jpg

Ellis is retained by a number of local school districts to test potable (drinking) water for lead content. 

BACKGROUND - Dissolved lead in drinking water is poisonous.  It can lead to nerve and brain damage, particularly in exposed children.  Lead can enter a school's water supply in one of two ways:

Through a contaminated municipal water supply (ala Flint, Michigan); or Through deteriorating lead joints in the building's branch, copper supply lines.  As the joints deteriorate, they can release lead directly into the water.  This is of particular concern in older buildings.

CASE HISTORY – So far, results from testing at different schools have been fairly consistent; lead has been identified in a small percentage of water fountains at each school.  So let's use the first school tested as an example:

Continue reading
Tags:
2192 Hits

Friable vs. Non-Friable

image001.jpg
image002.jpg

In its normal state, asbestos-containing floor tile is "non-friable" - that is, cannot be crushed under normal hand pressure. Because asbestos is an inhalation hazard, this quality makes non-friable materials safer to work around and remove.  In California, OSHA (Title 8 S1529) and the SCAQMD (Rule 1403) recognize this fact, and regulate the two types of  materials (ACMs) differently.  Removal of non-friable materials (such as roofing mastics) often require little more than proper signage and trained workers, while the removal of friable fireproofing requires numerous additional engineering controls:  negative air filtration, critical barriers at doors and windows, poly sheeting on walls, 3-stage decon unit, and so on. 

In the eyes of the SCAQMD, removal of asbestos flooring mastic, if performed with scrapers and mild solvents, does NOT render the material friable, and it may be transported as non-friable / non-hazardous asbestos waste. For larger work areas, most abatement contractors find it best to supplement the use of solvents with abrasive pads affixed to rotary scrubbing machines.  The SCAQMD views this as "removal by mechanical means", which automatically re-classifies the mastic as "friable."  This in turn triggers the requirement for tenting, HEPA filtration, 3-stage decon unit, and other OSHA Class 1 engineering controls.

But what about the waste that is generated during this process?  We recently observed a contractor install Class 1 engineering controls as required prior to the use of mechanical buffer machines to remove mastic.  All good and in compliance with AQMD rules. 

Continue reading
Tags:
3524 Hits

Certified Asbestos Consultant

California OSHA considers the administration of an asbestos abatement project to be a “Health and Safety” service, requiring the participation of a CAC.

Ellis recently responded to an asbestos emergency at a major southern California university. An abatement contractor had been given an asbestos survey report prepared by Ellis. They were then hired to remove the asbestos materials in that report prior to renovation.

And here's where it got odd: An outside "construction manager" suddenly convinced the college that this newest project could be managed "in-house," i.e. without assistance or input from Ellis or from any other California-certified asbestos consultant (CAC).

Continue reading
Tags:
1972 Hits

California, Asbestos, and Disclosure Protocols

A potential client asked me an important question: "After performing an asbestos building survey, does [Ellis] have an obligation to disclose any asbestos findings to any State/regulatory agency? Or will it remain private to the client?"

I thought it was an important enough question to share the answer I gave, along with the opinions of a couple of Ellis employees:

Duane: "Unlike with lead paint, there is no legal requirement for a testing agency to share asbestos sampling results directly with any regulatory agency. It is the Owner and general contractor who must, by law, provide results of sampling to employees, building occupants and any trades working in the building."

Continue reading
Tags:
1382 Hits

ASBESTOS REQUIREMENTS - Cal-OSHA vs. SCAQMD

damaged_asbestos_ceiling.jpg

Both California OSHA and the South Coast Air Quality Management District (SCAQMD) regulate the disturbance, removal and disposal of asbestos-containing materials. However, significant differences between the two agencies exist, and it’s important to know the difference.  They are listed below:

SCAQMD Rule 1403

1Prior to renovation or demolition, the SCAQMD requires an asbestos survey for ALL structures REGARDLESS OF BUILDING AGE. The SCAQMD is relatively active in southern California. They require notification of any abatement project >100 s.f., and will often visit abatement projects at random. Penalties for non-compliance can be severe. The SCAQMD does not regulate asbestos at concentrations <1%. (1.0%) . The SCAQMD enforces limits on airborne emissions of hazardous dusts and fumes. The SCAQMD is a federally funded agency.

Cal-OSHA - Cal Title 8 Section 1529

Prior to renovation or demolition, Cal-OSHA requires an asbestos survey for pre-1980 construction. Routine site visits from Cal-OSHA are rare. They do respond to written complaints, worker injury or death. Like the SCAQMD, OSHA requires notification of any abatement project >100 s.f. Cal-OSHA regulates asbestos at concentrations greater than one-tenth of 1% (0.1%). Cal-OSHA enforces worker safety rules in California. Cal-OSHA is funded by the state of California.
Continue reading
Tags:
1837 Hits

Ultra-Fine Particles (UFPs) Air Quality in Airport Areas

jet.jpg

Ellis has recently performed a number of preliminary air quality assessments in office buildings in and around Los Angeles and other airports.  The sampling is often prompted by office occupants’ observations of settled carbon black dust on shelves, desks and ventilation grilles. 

As a matter of standard practice in such efforts, Ellis will include sampling for various types of dusts: PM10, nuisance, respirable, fibrous (including asbestos and fiberglass) . . . . and something relatively new in the industry; “ultra-fine particles,” or “UFPs.” 

UFPs are those particles measuring less than 0.1 micron in diameter.  In any given sample of air, UFPs constitute the greatest number of particles, yet make up only a small fraction of the mass.  Although researchers are currently studying UFPs to identify any links to specific health effects, actual IAQ investigations in thousands of buildings have already shown that UFPs can be directly related to complaints. Due to their numerous quantity and ability to penetrate deep within the lung, UFPs are a major concern for respiratory exposure and health.  This is of special concern in airport areas.  Why?  Read on . . .  

Continue reading
Tags:
1390 Hits

ASBESTOS IN POST-1980 BUILDINGS

old_and_new.jpg

Rule 1403(d)(1)(A) states an asbestos survey is required for both these buildings before an renovation is begun.

In any building older than 1980, California OSHA (Title 8 Section 1529) has always required asbestos bulk sampling prior to renovation or demolition. But asbestos continued to be installed in new construction up to around 1989.

More recently, we've found asbestos flooring and roofing materials in buildings constructed as recently as 2002! The South Coast Air Quality Management District (SCAQMD) is clear:

Continue reading
Tags:
1577 Hits

Lead-Based Paint - XRF Sampling

gun1_1.png

We just put a new, state-of-the art XRF lead paint analyzer, the Heuresis Pb200i, into field operation.  This is currently the smallest, lightest-weight, highest-performance XRF instrument ever produced. With a color touchscreen display, active shock sensing, Wi Fi / Bluetooth capability, a built-in camera and GPS system, this new precision instrument continues Ellis’ position as a leader in lead-testing services in California.

We plead guilty to loving our gadgets.  But as with every new piece of equipment we invest in, our goal is to deliver more accurate testing results, faster for less money.  And the Heuresis certainly qualifies.

 
Continue reading
Tags:
1521 Hits

Ellis typically accepts only commercial/ industrial projects but in this case, we made an exception. . . .

beverlyhills.jpg

An Ellis team of three has just completed a full-on asbestos survey of a 10,000 s.f. private residence in Beverly Hills. – yes, that’s 10,000 square feet, not including various detached buildings. The home was owned and occupied for years by a female performer and icon of the entertainment industry. It includes a guest house, a separate exercise wing, FIFTEEN bathrooms, a pool and detached pool house, a poker room and other amenities. Just the basics, really.

The assessment phase now complete, Ellis will assist the new owner and architect in completing desired renovations, with removal of identified hazardous materials the first step in the process.

 
Continue reading
Tags:
1278 Hits

Ellis tests for residual methamphetamine

Last week, Ellis provided swab testing for potential, residual methamphetamine in a private residence. The town home, located in an affluent neighborhood, was clean and well maintained. But the new owner was concerned with an odor he thought might be from a former (or nearby) meth lab. A meth lab in "the nice part of town"?  More and more, as reported by Time Magazine, labs are being placed in locations you would not suspect, including inside a Cedar Rapids, IA Taco Bell (Time, 8-5-15 by Tanya Basu). There is a happy ending in our town home.  The homeowners' association retained Ellis for the required testing and, fortunately, no trace of meth was found. All is well. :-)  And, there has been no talk of "Ellis CSI" in our future. Crystal Meth facts:  http://chemistry.about.com/od/medicalhealth/a/crystalmeth.htm

Continue reading
Tags:
1163 Hits

Asbestos Abatement Roulette

This may sound like one of those scare-you-into-using-us missives.  And, in effect, that’s what it gets down to.  But as you know, that isn’t my style, so why?

I’m writing this because we still see building owners attempt to manage and administer asbestos abatement projects on their own.  I know, this sounds ridiculous in 2015, but otherwise reasonable people pick up this loaded gun, spin the cylinder and pull the trigger.

Why?  Perhaps because you’ll save some money.  Or it may not seem that “bad” or “big” a problem.  In, out, we’ll get it all and move on.  But, and we all know there’s a “but”  (several, actually). . .

Continue reading
Tags:
1515 Hits